S3000扭矩感測器

Product & Service

德國NCTE AG 3000系列扭矩感測器—NCTE感測器中的精度冠軍

3000系列和結構相同的4000系列致力於高精度的量測。3000系列量測精度≤±0.2 %，可即時量測靜態或動態扭矩。

感測器為德國製造，交貨快速。專利磁致伸縮技術—無接觸式測量，可免於磨損。即插即用，不需使用額外的訊號放大器。各型號皆隨附5m的訊號線與校正證書。

應用範圍

實驗室
測試設備
品質監控

規格

量測範圍：50 Nm至2000 Nm，雙向。
轉速：≤ 10000 rpm
精度：≤±0.2 %
工作溫度：-40 °C至+85 °C
防護等級：IP50
輸出訊號選項：0-10V / 4-20 mA
截止頻率：2500 Hz
形式：方軸 / 圓軸

配件

顯示錶
聯軸器

想了解更多資訊? 立即點選上方[型錄下載]。

相關推薦

Torque ranges

Model line Series 3000 Round shaft	Nominal torque bidirectional (+/-) [Nm]	Limiting torque unidirectional [Nm]	Limiting torque bidirectional (+/-) [Nm]	RPM [rpm]
Ø 15 mm	50	65	65	10000
Ø 15 mm	100	130	130	10000
Ø 25 mm	250	325	325	8000
Ø 25 mm	500	650	650	8000
Ø 40 mm	1000	1300	1300	5000
Ø 40 mm	2000	2600	2600	5000

Model line Series 3000 Square shaft	Nominal torque bidirectional (+/-) [Nm]	Limiting torque unidirectional [Nm]	Limiting torque bidirectional (+/-) [Nm]	RPM [rpm]
⅜ inch	50	50	35	10000
¾ inch	250	250	250	8000
1 inch	1000	1000	670	5000

Note: In case of overload, the sensor leads to a measurement offset. In such case, the sensor needs to be recalibrated at NCTE AG. The sensor should be operated only within the specified nominal torque range.

Load characteristics

Model line Series 3000 Measuring range	Axial force [N]¹	Limit transverse force [N]	Limit bending moment [Nm]
50 and 100	2300	300	41.7
250 and 500	7000	800	176
1000 and 2000	24000	200	700

Any irregular stress (bending moment, transverse or axial force, exceeding the nominal torque) up to the specified static load limit is only permissible as long as none of the other stresses can occur. Otherwise the limit values must be reduced. If 30 % of the limit bending moment and 30 % of the limit transverse force are present in each case, only 40 % of the axial force is permissible, whereby the nominal torque must not be exceeded.

其他詳細內容可以下載右方產品規格，或預約安排拜訪，由巨克富科技專人詳細為您解說及產品示範。

S3000扭矩感測器

技術諮詢

其他詳細內容可下載產品型錄介紹，或預約安排拜訪，由巨克富科技專人詳細為您解說及產品示範。

Product & Service

Product & Service

產品搜尋

S3000扭矩感測器