Strain Gauge

Product & Service

巨克富科技科技經銷的各式應變規為日本Showa所提供，Showa成立於西元1962年，為全日本第一家成立的應變規製造商，在這將近五十年間，Showa仍舊能夠屹立不搖的關鍵在於對於應變量測掌握各項專業的知識與技術，因此美國奇異(GE)全球研發中心及日本豐田(Toyota)汽車總部規定所有研發過程的應變測試都指定使用Showa出廠的應變規。

Showa的前身是TML創辦成員之一，因此TML應變規的製作技術就是由Showa所提供；此外，日本知名品牌Kyowa應變規的製造也是由Showa提供關鍵技術。2001年Showa通過了ISO 9001認證，2002年更取得JCSS認證。巨克富科技所代理的Showa各式應變規絕對值得您的信賴。

應變規造型介紹

Strain Gauge Basic Pattern

以下表格方便您了解應變片的製造規格，依照不同材質我們區分為FA及MA兩種。

FA系列的應變片為Polyester材質，而另外一種MA系列的應變片為Polyimide材質。FA系列的應變片又將區分為更多的類型規格，他適用於廣泛應變量測的應用；而MA系列的應變片是為特殊環境需求而設計的，較適合使用於溫度較高的應變量測或是適用於科學研究及特殊工業用途。

Specification	FA Series	MA Series	Unit and Note
Gauge Length	0.3mm to 60mm	0.3mm to 60mm	Standard
Gauge Resistance	Within±0.3%of the nominal resistance	Within±0.3%of the nominal resistance	120Ω to 1000Ω
Foil Material	A: Cu-Ni Alloy	A: Cu-Ni Alloy
Base Material	Polyester	Polyimide
Gage Factor	2.00(Nominal)	2.00(Nominal)	1.90 to 2.10
Measurable Strain	2 to 4% maximum	2 to 4% maximum	Up to 10% with yielding strain
Temperature Range	-30℃ to +80℃	-30℃ to +180℃
Thermal Output	±2μst/℃(RT to +80℃)	±2μst/℃(RT to +160℃) ±5μst/℃(+160℃ to higher)	Compensated temperature range
Gauge Factor Change with Temperature	±0.015%/℃	±0.015%/℃	Refer to“Tech information”
Fatigue Life	More than 1×10^5 reversals	More than 1×10^5 reversals	at ±1000×10^6 strain
Applicable Linear Expansion Coefficient	Common steel Stainless steel Aluminum alloy	Common steel Stainless steel Aluminum alloy	10.8ppm/℃ 16.2ppm/℃ 23.4ppm/℃

應變規型號解讀

Basic Patterns and Combinations
N	11	Uniaxial
N	22	Biaxial 0°/90°, stacked rosette
N	32	Triaxial 0°/45°/90°, stacked rosette
N	21	2-Element 0°/90°, plane layout
N	23	2-Element 0°, parallel layout
N	31	3-Element 0°/45°/90°.plane layout
N	34	△type 3-Element, plane layout
N	35	Y type 3-Element, plane layout
N	51	5-Element 90°, leads at one end
R	11	Uniaxial 90°, leads at one end
R	31	3-Element 90°, leads at one end
R	51	5-Element90°, lead at one end
T	11	Uniaxial 0°, leads at both ends
T	24	2-Element 0°/90°, leads at both ends
U	11	Uniaxial 90°, leads at both ends
Z	11	Uniaxial45°, for shearing strain
Z	23	2-Element±45°, for shearing strain
Q	44	4-Element, for pressure sensor
Y	11	Uniaxial, for yield strain
C	11	For crack analysis
X	11	For crack propagation detection
P	11	For bolt spindle power measurement

	Compensated Materials(ppm/℃)
11	Common steel(11.7) SUS630(10.6) SNCM(11.3)
16	Stainless steel/SUS304(16.2) Beryllium teel(16.7) Copper(16.7)
23	Aluminum/2024-T4(23.2) Brass(21.0) Tin(23.0)

	Optional Specifications/Leadwire
VS	E	Parallel vinyl-coated lead wire
	Length	Select: 1m,3m,5m
	Size	Φ0.12*7(round)
	Resistance	0.44Ω/m(round)
VM	E	Parallel viny-coated lead wire
	Length	Select: 3m,5m
	Size	Φ0.12*10(core)
	Resistance	0.32Ω/m(round)
VL	E	Parallel vinyl-coated lead wire
	Length	Select: 3m, 5m
	Size	Φ0.18*7(core)
	Resistance	0.20Ω/m(round)
FE	---	Teflon-coated lead wire
	Length	3m
	Size	Φ0.18*7(core)
	Resistance	0.20Ω/m(round)
L	---	Polyester-coated lead wire
	Length	Select: 0.3m, 0.5m
	Size	Φ0.14*1(core)
	Resistance	2.24Ω/m(round)
W	E	Waterproof Moulded strain gage
	Length	Select: 1m, 3m
	Size	Φ0.12*7(core)
	Resistance	0.44Ω/m(round)

泛用型款式

Kinds	Uniaxial Strain Gages	Biaxial Strain Gages	Triaxial Strain Gages	Stress Concentration Measurement
Pattern Code	N11	N22	N32	R11, N51, R51…
Lead wire pre-attached	N11…VS…	N22…VS…	N32…VS…	R11, N51, R51…VS…
Basic pattern

特殊應用款式

Kinds	Uniaxial 45°	Crack Detection	Pipe Gage
Purpose	Shearing stress and torque measurement	Crack propagation detection and analysis	Bolt spindle power measurement
Pattern Code	Z11…	X11…	P11…
Basic pattern

類別

通用型
常溫型(FA type)
高溫型(MA type)
帶導線五連應變規
樹脂塗層銅線應變規
帶導線Crack gauge

通用型

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）
				Grid		Base
				Length	Width	Length	Width
	N11-FA-03-120-(11)	120	1.9	0.3	1.8	3.5	2.5
	N11-FA-1-120-(11)	120	2.0	1.0	1.5	4.0	2.5
	N11-FA-1-120-(11)-P4	120	2.0	1.0	1.0	4.0	2.0
	N11-FA-1-350-(11)	350	2.0	1.0	2.4	5.0	4.0
	N11-FA-2-120-(11)	120	2.0	2.0	1.6	6.0	2.5
	N11-FA-2-350-(11)	350	2.0	2.0	2.2	7.0	3.5
	N11-FA-3-120-(11)	120	2.1	3.0	1.6	7.0	2.8
	N11-FA-5-120-(11)	120	2.1	5.0	1.8	9.5	3.5
	N11-FA-5-350-(11)	350	2.1	5.0	2.6	11.0	4.0
	N11-FA-5-1000-(11)	1000	2.1	5.0	3.2	9.5	5.0
	N11-FA-8-120-(11)	120	2.1	8.0	2.0	13.0	4.0
	N11-FA-8-350-(11)	350	2.1	8.0	4.0	14.0	6.0
	N11-FA-10-120-(11)	120	2.1	10.0	2.2	15.0	5.0
	N11-FA-10-350-(11)	350	2.1	10.0	4.5	18.0	6.5
	N11-FA-10-600-(11)	600	2.1	10.0	3.0	16.0	5.0
	N11-FA-10-1000-(11)	1000	2.0	10.0	4.5	16.0	6.0
	N11-FA-30-120-(11)	120	2.1	30.0	1.2	40.0	4.5
	N11-MA-03-120-(11)	120	1.9	0.3	1.8	3.5	2.5
	N11-MA-1-120-(11)	120	2.0	1.0	1.5	4.0	2.5
	N11-MA-1-120-(11)-P4	120	2.0	1.0	1.0	4.0	2.0
	N11-MA-1-350-(11)	350	2.0	1.0	2.4	5.0	4.0
	N11-MA-2-120-(11)	120	2.0	2.0	1.6	6.0	2.5
	N11-MA-2-350-(11)	350	2.0	2.0	2.2	7.0	3.5
	N11-MA-3-120-(11)	120	2.1	3.0	1.6	7.0	2.8
	N11-MA-5-120-(11)	120	2.1	5.0	1.8	9.5	3.5
	N11-MA-5-350-(11)	350	2.1	5.0	2.6	11.0	4.0
	N11-MA-5-1000-(11)	1000	2.1	5.0	3.2	9.5	5.0
	N11-MA-8-120-(11)	120	2.1	8.0	2.0	13.0	4.0
	N11-MA-8-350-(11)	350	2.1	8.0	4.0	14.0	6.0
	N11-MA-10-120-(11)	120	2.1	10.0	2.2	15.0	5.0
	N11-MA-10-350-(11)	350	2.1	10.0	4.5	18.0	6.5
	N11-MA-10-600-(11)	600	2.1	10.0	3.0	16.0	5.0
	N11-MA-10-1000-(11)	1000	2.0	10.0	4.5	16.0	6.0

	N22-FA-1-120-(11,16,23)	120	2.0	1.0	1.5	Φ6.0
	N22-FA-2-120-(11,16,23)	120	2.0	2.0	1.6	Φ8.0
	N22-FA-5-120-(11,16,23)	120	2.1	5.0	1.8	Φ11.0
	N22-FA-5-350-11	350	2.1	5.0	2.6	Φ15.0
	N22-FA-8-120-(11,16,23)	120	2.1	8.0	2.0	Φ15.0
	N22-FA-10-120-(11,16,23)	120	2.1	10.0	2.2	Φ18.0
	N22-MA-1-120-(11,16,23)	120	2.0	1.0	1.5	Φ6.0
	N22-MA-2-120-(11,16,23)	120	2.0	2.0	1.6	Φ8.0
	N22-MA-5-120-(11,16,23)	120	2.1	5.0	1.8	Φ11.0
	N22-MA-5-350-11	350	2.1	5.0	2.6	Φ15.0
	N32-FA-1-120-(11,16,23)	120	2.0	1.0	1.5	Φ6.0
	N32-FA-2-120-(11,16,23)	120	2.0	2.0	1.6	Φ8.0
	N32-FA-5-120-(11,16,23)	120	2.1	5.0	1.8	Φ11.0
	N32-FA-5-350-11	350	2.1	5.0	2.6	Φ16.0
	N32-FA-8-120-(11,16,23)	120	2.1	8.0	2.0	Φ16.0
	N32-FA-10-120-(11,16,23)	120	2.1	10.0	2.2	Φ18.0
	N32-MA-2-120-(11,16,23)	120	2.0	2.0	1.6	Φ8.0
	N32-MA-5-120-(11,16,23)	120	2.1	5.0	1.8	Φ11.0
	N32-MA-5-350-11	350	2.1	5.0	2.6	Φ16.0
	N51-FA-1-120-(11,16,23)	120	2.0	1.0,	1.5	12.0	4.0
	N51-FA-2-120-(11,16,23)	120	2.0	2.0	1.6	15.0	6.0
	N51-MA-1-120-(11,16,23)	120	2.0	1.0	1.5	12.0	4.0
	N51-MA-2-120-(11,16,23)	120	2.0	2.0	1.6	15.0	6.0
	R11-FA-1-120-(11,16,23)	120	2.0	1.0	2.2	5.5	3.0
	R11-FA-2-120-(11,16,23)	120	2.0	2.0	1.8	6.0	3.5
	R11-MA-1-120-(11,16,23)	120	2.0	1.0	2.2	5.5	3.0
	R11-MA-2-120-(11,16,23)	120	2.0	2.0	1.8	6.0	3.5
	R51-FA-03-120-(11,16,23)-P4	120	2.0	0.3	1.2	6.0	5.0
	R51-FA-1-120-(11,16,23)	120	2.0	1.0	0.5	11.0	4.0
	R51-FA-2-120-(11,16,23)	120	2.0	2.0	0.8	15.0	4.5
	R51-MA-03-120-(11,16,23)-P4	120	2.0	0.3	1.2	6.0	5.0
	R51-MA-1-120-(11,16,23)	120	2.0	1.0	0.5	11.0	4.0
	R51-MA-2-120-(11,16,23)	120	2.0	2.0	0.8	15.0	4.5
	T24-FA-2-120-(11,16,23)	120	2.0	2.0	2.5	8.0	6.0
	T24-FA-5-120-(11,16,23)	120	2.1	5.0	6.0	20.0	15.0
	T24-FA-5-350-11	350	2.1	5.0	6.0	20.0	15.0
	T24-MA-2-120-(11,16,23)	120	2.0	2.0	2.5	8.0	6.0
	T24-MA-5-120-(11,16,23)	120	2.1	5.0	6.0	20.0	15.0
	T24-MA-5-350-11	350	2.1	5.0	6.0	20.0	15.0
	Z11-FA-1-120-(11,16,23)	120	2.0	1.0	3.9	5.0	2.5
	Z11-FA-2-120-(11,16,23)	120	2.0	2.0	4.0	13.0	5.0
	Z11-FA-5-120-11	120	2.0	5.0	2.6	15.0	10.0
	Z11-FA-10-120-11	120	2.1	10.0	5.0	26.0	16.0
	Z11-MA-1-120-(11,16,23)	120	2.0	1.0	3.9	5.0	2.5
	Z11-MA-2-120-(11,16,23)	120	2.0	2.0	4.0	13.0	5.0
	Z11-MA-5-120-11	120	2.0	5.0	2.6	15.0	10.0
	Z11-MA-10-120-11	120	2.1	10.0	5.0	26.0	16.0
	P11-FA-05-120-11	120	1.9	0.5	---	Φ1.0×3.0
	P11-FA-2-120-11	120	2.1	2.0	---	Φ1.5×7.0
	P11-FA-3-120-11	120	2.1	3.0	---	Φ2.0×10.0
	P11-MA-3-120-11	120	2.1	3.0	---	Φ2.0×10.0

常溫型(FA type)

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）				Leadwire Length （m）
				Grid		Base
				Length	Width	Length	Width
	N11-FA-03-120-(11)-VSE03	120	1.9	0.3	1.8	3.5	2.5	0.3
	N11-FA-03-120-(11)-VSE1	120	1.9	0.3	1.8	3.5	2.5	1.0
	N11-FA-03-120-(11)-VSE3	120	1.9	0.3	1.8	4.0	2.0	3.0
	N11-FA-03-120-(11)-VSE5	120	1.9	0.3	1.8	4.0	2.0	5.0
	N11-FA-1-120-(11)-P4-VSE03	120	2.0	1.0	1.0	4.0	2.0	0.3
	N11-FA-1-120-(11)-P4-VSE1	120	2.0	1.0	1.0	4.0	2.0	1.0
	N11-FA-1-120-(11)-P4-VSE3	120	2.0	1.0	1.0	4.0	2.0	3.0
	N11-FA-1-120-(11)-P4-VSE5	120	2.0	1.0	1.0	4.0	2.0	5.0
	N11-FA-2-120-(11)-VSE03	120	2.0	2.0	1.6	6.0	2.5	0.3
	N11-FA-2-120-(11)-VSE1	120	2.0	2.0	1.6	6.0	2.5	1.0
	N11-FA-2-120-(11)-VSE3	120	2.0	2.0	1.6	6.0	2.5	3.0
	N11-FA-2-120-(11)-VSE5	120	2.0	2.0	1.6	6.0	2.5	5.0
	N11-FA-5-120-(11)-VSE03	120	2.1	5.0	1.8	9.5	3.5	0.3
	N11-FA-5-120-(11)-VSE1	120	2.1	5.0	1.8	9.5	3.5	1.0
	N11-FA-5-120-(11)-VSE3	120	2.1	5.0	1.8	9.5	3.5	3.0
	N11-FA-5-120-(11)-VSE5	120	2.1	5.0	1.8	9.5	3.5	5.0
	N22-FA-1-120-(11)-VS03	120	2.0	1.0	1.5	Φ6.0		0.3
	N22-FA-1-120-(11)-VS1	120	2.0	1.0	1.5	Φ6.0		1.0
	N22-FA-1-120-(11)-VS3	120	2.0	1.0	1.5	Φ6.0		3.0
	N22-FA-1-120-(11)-VS5	120	2.0	1.0	1.5	Φ6.0		5.0
	N22-FA-2-120-(11)-VS03	120	2.0	2.0	1.6	Φ8.0		0.3
	N22-FA-2-120-(11)-VS1	120	2.0	2.0	1.6	Φ8.0		1.0
	N22-FA-2-120-(11)-VS3	120	2.0	2.0	1.6	Φ8.0		3.0
	N22-FA-2-120-(11)-VS5	120	2.0	2.0	1.6	Φ8.0		5.0
	N22-FA-5-120-(11)-VS03	120	2.1	5.0	1.8	Φ11.0		0.3
	N22-FA-5-120-(11)-VS1	120	2.1	5.0	1.8	Φ11.0		1.0
	N22-FA-5-120-(11)-VS3	120	2.1	5.0	1.8	Φ11.0		3.0
	N22-FA-5-120-(11)-VS5	120	2.1	5.0	1.8	Φ11.0		5.0
	N32-FA-1-120-(11)-VS03	120	2.0	1.0	1.5	Φ6.0		0.3
	N32-FA-1-120-(11)-VS1	120	2.0	1.0	1.5	Φ6.0		1.0
	N32-FA-1-120-(11)-VS3	120	2.0	1.0	1.5	Φ6.0		3.0
	N32-FA-1-120-(11)-VS5	120	2.0	1.0	1.5	Φ6.0		5.0
	N32-FA-2-120-(11)-VS03	120	2.0	2.0	1.6	Φ8.0		0.3
	N32-FA-2-120-(11)-VS1	120	2.0	2.0	1.6	Φ8.0		1.0
	N32-FA-2-120-(11)-VS3	120	2.0	2.0	1.6	Φ8.0		3.0
	N32-FA-2-120-(11)-VS5	120	2.0	2.0	1.6	Φ8.0		5.0
	N32-FA-5-120-(11)-VS03	120	2.1	5.0	1.8	Φ11.0		0.3
	N32-FA-5-120-(11)-VS1	120	2.1	5.0	1.8	Φ11.0		1.0
	N32-FA-5-120-(11)-VS3	120	2.1	5.0	1.8	Φ11.0		3.0
	N32-FA-5-120-(11)-VS3	120	2.1	5.0	1.8	Φ11.0		5.0

高溫型(MA type)

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）				Leadwire Length （m）
				Grid		Base
				Length	Width	Length	Width
	N11-MA-03-120-(11)-FE3	120	1.9	0.3	1.8	3.5	2.5	3.0
	N11-MA-1-120-(11)-P4-FE3	120	2.0	1.0	1.0	4.0	2.0	3.0
	N11-MA-2-120-(11)-FE3	120	2.0	2.0	1.6	6.0	2.5	3.0
	N11-MA-5-120-(11)-FE3	120	2.1	5.0	1.8	9.5	3.5	3.0

帶導線五連應變規

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）				Leadwire Length （m）
				Grid		Base
				Length	Width	Length	Width
	R51-FA-1-120-11-VM3(Lead wire 5 colors)	120	2.0	1.0	0.5	11.0	4.0	3.0

樹脂塗層銅線應變規

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）				Leadwire Length （m）
				Grid		Base
				Length	Width	Length	Width
	N11-FA-1-120-11-P4-L05	120	2.0	1.0	1.0	4.0	2.0	0.5
	N11-FA-2-120-11-L05	120	2.0	2.0	1.6	6.0	2.5	0.5
	Z11-FA-1-120-11-L05	120	2.0	1.0	3.9	5.0	2.5	0.5
	Z11-FA-1-120-11-L08	120	2.0	1.0	3.9	5.0	2.5	0.8
	Z11-FA-1-120-11-L1	120	2.0	1.0	3.9	5.0	2.5	1.0
	Y11-FA-2-120-11-L05	120	2.0	2.0	1.7	7.5	3.5	0.5
	R51-FA-1-120-11-L03	120	2.0	1.0	0.5	11.0	4.0	0.3
	N51-FA-1-120-11-L03	120	2.0	1.0	1.5	12.0	4.0	0.3

帶導線Crack gauge

Strain Gage Pattern	Type	Nominal Resistance （Ω）	Apporox Gage Fator	Dimension（mm）				Leadwire Length （m）
				Grid		Base
				Length	Width	Length	Width
	X11-FA-5-120-VSE3	120	---	5.0	1.7	11.0	4.0	3.0
	X11-FA-10-120-VS3	120	---	10.0	0.25	14.0	3.0	3.0
	X11-FA-30-120-VSE3	120	---	30.0	0.7	35.0	4.0	3.0
	X11-FA-30-120-VS3	120	---	30.0	0.7	35.0	4.0	3.0

其他詳細內容可以下載右方產品規格，或預約安排拜訪，由巨克富科技專人詳細為您解說及產品示範。

Strain Gauge

技術諮詢

其他詳細內容可下載產品型錄介紹，或預約安排拜訪，由巨克富科技專人詳細為您解說及產品示範。

Product & Service

Product & Service

產品搜尋

Strain Gauge