Main areas of application for the 2300 Series
Distinctive features
Technical data
Torque ranges
Model line Series 2300 |
Nominal torque bidirectional (+/-) [Nm] |
Limiting torque unidirectional [Nm] |
Limiting torque bidirectional (+/-) [Nm] |
RPM [rpm] |
Ø 8 mm |
0.5 |
0..5 |
0.5 |
10000 |
1 |
1.3 |
1.3 |
||
Ø 9 mm |
2.5 |
3.25 |
3.25 |
|
5 |
6.5 |
6.5 |
||
10 |
13 |
13 |
||
20 |
26 |
26 |
||
Ø 15 mm |
50 |
65 |
65 |
|
100 |
130 |
130 |
Note: In case of overload, the sensor leads to an offset in measurement. In such case, the sensor needs to be recalibrated at NCTE AG. The sensor should be operated only within the specified nominal torque range.
Load characteristics
Series 2300 Measuring range |
Axial force [N]1 |
Limit transverse force [N] |
Limit bending moment [Nm] |
0.5 |
250 |
5 |
0.5 |
1 |
500 |
8 |
1 |
2.5 and 5 |
1000 |
20 |
2.5 |
10 and 20 |
1000 |
30 |
12.5 |
50 and 100 |
1000 |
100 |
41.7 |
Any irregular stress (bending moment, transverse or axial force, exceeding the nominal torque) up to the specified static load limit is only permissible as long as none of the other stresses can occur. Otherwise the limit values must be reduced. If 30 % of the limit bending moment and 30 % of the limit transverse force are present in each case, only 40 % of the axial force is permissible, whereby the nominal torque must not be exceeded.
© 2019 Chief SI INC. - Design By Armlet