Product & Service
Strain Amplifier
GTSA-16
This product is a Strain Amplifier displaying ±10V analogue signals on LCD screen by calculating various sensor's input signals. This has the functions of strain measurement and analogue output and more functions than existing universal amplifier.
Feature
- Simultaneously verifying real data values and output voltage values
- Setting the type of sensor, sensor specification, decimal places, or units on touchable screen
- Not need a separate bridge box due to built-in 120 Ω/350 Ω bridge circuit
- Can be mounted in 19“ rack (3U)
- D/A offset and D/A span value adjustment
- Able to select sensor type, power supply, amplification ratio of amplifier or filter frequency
- Built channel in slot type, 2-channel per slot
- Two-way circular connector and 5-pin green connector
|
Model |
GTSA-6 |
GTSA-16 |
|
Number of Channel |
2, 4, 6 channel |
2, 4, 6, 8, 10, 12, 14, 16 channel |
|
Display |
5.6 inch TFT Touchable LCD |
|
|
Measure Hz |
10 KHz |
|
|
Analog Output Hz |
10 KHz |
|
|
Input Sensor |
- 1Gage & 2Gage : 120Ω, 350Ω - 4 Gage Bridge Sensor : 0.5 mV/V ~ 100 mV/V - Potentiometer Sensor - Voltage: 10 V |
|
|
Strain Input Range |
10,000, 100,000, 1,000,000 X 10-6 strain |
|
|
Low Pass Filter |
10 Hz, 100 Hz, 1 KHz, 10 KHz |
|
|
Bridge EXC Voltage |
2V, 5V, 10V |
|
|
A/D Conversion |
16 Bit 10,000 times/sec |
|
|
D/A Conversion |
16 Bit 10,000 times/sec |
|
|
Dimension |
255(W)*160(H)*270(D)mm |
450(W)*132(H)*280(D)mm |
|
Power |
AC 220 V, 50~60 Hz |
|
If you are interesting this products, please download the catalog now. A sales representative will contact with you as soon as possible
© 2019 Chief SI INC. - Design By Armlet